Almond Granite Tiles & Pavers

DescriptionWarm-toned with a peachy base, it strikes gold when toning with and complementing anything brick. Almond is gentle and comforting and is here to help!
Why choose Almond Granite? Almond Granite is dense and durable and is very resistant to staining. Its lovely warm colour tones make it ideal for use in both traditional and modern settings. Almond is very cool underfoot compared to darker colours. It is highly non-slip. The tiles are accurately sized, cut well and are easy to lay. There is a varying quantity of yellow flecks from tile to tile and the tiles may display some grey patching and veining. Almond also contains a small amount of mica which sparkles in the sunlight. Each batch may have Mushroom tiles in the mix.
MaintenanceMinimal. Seal with penetrating sealer to make cleaning easier. The surface can get brown marks on it early in its life. This is easily removed and will not continue past the short term. Click here to learn more about how to care for your natural stone.
Relative PricingHigh range - higher than grey granite, linen travertine and limestone.
Stocked Tile Sizes400 x 400 x 20mm, 600 x 400 x 20mm, 600 x 600 x 20mm
Stocked Matching PiecesCoping - Bullnose, Square edge, Bullnose External Corner, Square Edge External Corner, Rebated Bullnose External Corner, Rebated Square Edge External Corner, Rebated Bullnose, Rebated Square Edge, Grande, Skimmer Lids, Cobblestone, Grate. Get more information and see larger coping profile photos
AvailabilityIn Stock
Custom OrdersYou can choose your own sizes, pattern, profile and surface finish - allow 8-10 weeks from order date.
Slip Rating (Wet Pendulum)A P5 (V) pendulum classification, (AS 4586) “New surfaces” is the highest wet pendulum classification available under the current standards. For pool surrounds, a minimum of P4 is required.

Disclaimer:Due to the colour variations inherent in natural stone, care should be taken when laying your tiles. It is recommended that tiles/pavers from all crates should be blended as the job proceeds. Both thickness and dimensions may vary up to +/- 2mm. Therefore, tiles may have to be graded accordingly.

Back to Top