Noosa Shore Limestone tumbled Tiles & Pavers

DescriptionNoosa Shore Limestone is a light, soft, sandy-coloured natural stone, perfect for achieving a neutral, mostly uniform, luxurious coastal look. Subtle natural variation and inlays of shell fossils add to its opulent beachy charm. Elegant coastal style.
Why choose Noosa Shore tumbled?Noosa Shore Limestone is cool and exquisite under foot and offers moderate slip resistance. Being a limestone tile, you will see veins and fossil inclusions which are an inherent property of this natural stone tile. After further weathering, it is not unusual for some of the shells to break away from the main tile leaving behind a small pit where the shell was. These add character to your paving and are not considered a fault. Tumbled Limestone also has small natural holes in the surface, adding texture to the finish. Natural colour and texture variations hide marks like dirt and leaves. It is accurately sized, cuts well and is easy to lay.
More product details below photos.

More details for Noosa Shore Limestone

Maintenance Requires sealing with a penetrating sealer to make cleaning easier. Use a pH neutral cleaner such as detergent and avoid acids in cleaning. An application of a specialised consolidating sealer is recommended for more protection against the weathering of natural inclusions. When choosing a natural stone coping around your pool, it is imperative to keep your water level at least 75mm from the bottom of the coping edge. This is especially true if you have a salt water pool! If the water is too close to your natural stone, the salt can be drawn up by the sun through the stone causing salt attack. If you don’t have an overflow valve/pipe you need to reduce your water levels manually. In addition to the correct water levels being adhered to, coping pieces should be sealed, within a few weeks of the pool being filled with water, using a ‘consolidating sealer’ and then a ‘penetrating sealer’, as per professional advice and manufacturer recommendations. Click here to learn more about how to care for your natural stone.
Relative PricingMid range - higher than concrete and sandstone.
Stocked Tile Sizes 400 x 400 x 20mm; 600 x 400 x 20mm; 400 x 400 x 30mm; 600 x 400 x 30mm
Stocked Matching PiecesCoping Profiles - Bullnose, Tumbled Edge, Skimmer Lids
AvailabilityIn Stock
Custom OrdersChoose your own sizes, pattern, profile and surface finish - allow 14-16 weeks from order
Slip Rating (Wet Pendulum)A P5 (V) pendulum classification, (AS 4586) “New surfaces” is the highest wet pendulum classification available under the current standards. For pool surrounds, a minimum of P4 is required.

Disclaimer: Due to the colour variations inherent in natural stone, care should be taken when laying your tiles. It is recommended that tiles/pavers from all crates should be blended as the job proceeds. Both thickness and dimensions may vary up to +/- 2mm. Therefore, tiles may have to be graded accordingly.

Back to Top